ND 1200R

    Specifications

    ND 1202 R

    ND 1203 R

    Axes

    2 from A to Z

    3 from A to Z

    Encoder inputs*

    TTL (D-sub female 9-pin) or 1 VPP (D-sub female 15 pin)

    Input frequency

    ≤ 200 kHz

    Signal period

    Any

    Line count

    Any

    Subdivision factor

    TTL: Max. 4-fold

    1 VPP: Max. 40-fold

    Display step 1)

    Adjustable, max. 7 digits

    Display

    5.7” monochrome flat-panel display for position values, dialogs and inputs, and soft keys

    Functions

    • Conversion of Cartesian coordinates (X,Y) to polar coordinates (R,A)
    • XY/RA switch-over
    • Alignment function
    • REF reference-mark evaluation for distance-coded or single reference marks
    • Distance-to-go display in machine coordinates R and A
    • mm/inch switching
    • Absolute-incremental display
    • Calculation of positions for hole patterns (circular patterns as well as linear patterns)
    • Probing functions for workpiece orientation and reference-point acquisition with KT edge finder: "Edge," "Centerline" and "Circle center"

    Programming

    Hole patterns with a total of 999 hole positions

    Cycles

    Hole patterns (circular and linear patterns) with max. 100 positions

    Error compensation

    Linear axis-error compensation as part of calibration

    Data interface

    • RS-232-C/V.24; 300 to 115 200 baud
    • USB type A

    Switching inputs

    • Zero reset, measured value output (e.g. by foot switch)
    • Edge finder (through universal touch probe interface)

    Accessories

    Mounting arms, KT-130 edge finder, foot switch

    Power connection

    100 V to 240 V AC (–15 % to +10 %), 47 Hz to 63 Hz; 30 W

    Operating temperature

    0 °C to 45 °C (storage temperature –20 °C to 70 °C)

    Protection EN 60 529

    IP 40

    Mounting*

    Tilting base or mounting base

    Weight

    Approx. 1.6 kg

    * Please select when ordering

    1) Depends on the signal period of the connected encoder as well as the subdivision factor