TL Micro 150/200/300

    Specifications

    Specifications

    TL Micro 150

    TL Micro 200

    TL Micro 300

    Tool diameter

    Central measurement

    Tangential measurement from above

    Tangential measurement from the side

    0.03 mm to 30 mm

    0.03 mm to 30 mm

    0.03 mm to 30 mm

    0.1 mm to 80 mm

    0.1 mm to 98 mm

    0.1 mm to 122 mm

    0.1 mm to 180 mm

    0.1 mm to 324 mm

    0.1 mm to 428 mm

    Repeatability

    ± 0.2 µm

    ± 1 µm

    Spindle speed*

    For individual tooth measurement, optimized to standard spindles or HSC spindles (> 30 000 rpm)

    Laser

    Visible red-light laser with beam focused at center of system

    Wavelength/Power

    630 nm bis 700 nm/< 1 mW

    Protection class IEC 825

    2

    Input signals

    Square-wave signals 24 V DC

    • Enable transmitter ENABLE 0
    • Enable 1 to receiver ENABLE 1
    • Enable 2 to receiver ENABLE 2

    Output signals

    Square-wave signals 24 V DC

    • Dynamic triggering signal DYN
    • Static triggering signal STA
    • Proper laser function LASER OK

    Voltage supply

    24 V DC / 160 mA

    Electrical connection*

    M23 flange socket (male), 12-pin, either on the side or bottom

    Mounting

    Within the machine work envelope

    Protection EN 60 529

    IP68 (when connected, with sealing air)

    Tool cleaning

    Blower

    Operating temperature

    Storage temperature

    10 °C to 40 °C

    0 °C to 50 °C

    Mass

    Including blower

    Cable outlet lateral

    Approx. 0.85 kg

    Approx. 0.95 kg

    Approx. 1.15 kg

    Cable outlet downward

    Approx. 0.90 kg

    Approx. 1.00 kg

    Approx. 1.20 kg

    * Please select when ordering