|
Specifications |
|
|
Components |
MC main computer with TFT color flat panel display (19-inch), or MC main computer with integrated TFT color flat-panel display (15.6 inch) for multitouch operation CC, UEC or UMC controller unit TE operating panel (19-inch or 15.6-inch) with
|
|
Operating system |
HEROS 5 real-time operating system for machine control |
|
NC program memory |
1.8 GB (on CFR compact flash memory card) |
|
Input resolution and display step |
X axis: 0.5 µm, diameter: 1 µm U, V, W, Y, Z axis: 1 µm B, C1/C2 axis: 0.001° |
|
Interpolation |
Straight line: in 2 principal axes (max. ±100 m), optional in 3 principal axes Circle: In 2 axes (radius max. 999 m), optional additional linear interpolation in the third axis C1/C2 axis: interpolation of X and Z linear axes with the C1/C2 axis (option) B axis: 5-axis interpolation between X, Z, Y, B, and C axes (option) |
|
Feed rate |
mm/min or mm/revolution Constant surface speed Max. feed rate (maximum 60 000/pole pair number × spindle pitch) with fPWM = 5000 Hz |
|
Spindle |
Maximum of 60 000 rpm (with option 49, max. 120 000 rpm) for motors with one pole pair |
|
Axis feedback control |
Integrated digital drive control for synchronous and asynchronous motors Position loop resolution: Signal period of the position encoder/1024 Cycle time of position controller: 0.2 ms Cycle time of speed controller: 0.2 ms Cycle time of current controller: minimum 0.05 ms |
|
Error compensation |
Linear and nonlinear axis error, backlash, reversal peaks during circular movements Static friction |
|
Data interfaces |
Gigabit Ethernet interface 1000BASE-T 4 x USB (1 x front USB 2.0; 3 x back panel USB 3.0) |
|
Diagnostics |
Fast and simple troubleshooting through integrated diagnostic aids |
|
Ambient temperature |
Operation: In electrical cabinet: 5 °C to 40 °C Storage: –20 °C to 60 °C |